recuperator

简明释义

英[rɪˈkjuːpəreɪtə]美[rɪˈkjʊpəˌretər]

n. 恢复者；同流换热器

英英释义

单词用法

同义词

反义词

例句

1.The feasibility and correctness of the parametric design for hydropneumatic recuperator are validated by an example.

通过实例验证了对复进机参数化设计的可行性和正确性。

2.The technical processing of designing and producing the cast iron recuperator for hot blast cupola is available.

根据熔化原理，提供设计制造铸铁热风炉胆的工艺过程和利用导程刮板的造型方法。

3.Working principle, construction and control of the burner with integrated recuperator (BICR) provided with radiant tube and developed by Kromschroeder Co. of Germany were described.

论述了由德国霍科德公司开发的与辐射管配套使用的自预热燃烧器的工作原理、结构和控制技术。

4.Porous medium(PM) was mounted into combustion chamber as the heat recuperator, and the working process of an engine is simulated by using a single-zone combustion model.

采用单区燃烧模型模拟多孔介质（PM）发动机的压缩、燃烧和膨胀过程。

5.The recuperator is one of the main components of the micro turbine in energy island system.

回热器是能源岛系统中微型燃气轮机的一个主要部件。

6.At the present time, from the point of view of recycling waste heat of intermediate and low temperature fume the recuperator has still more extensive spreading values and prospects for applying.

在目前，对于中低温烟气的余热回收来说，更具有广泛的推广价值和应用前景。

7.The engineer explained how the recuperator 回收器 improves energy efficiency in industrial processes.

工程师解释了<recuperator>回收器recuperator>如何提高工业过程中的能效。

8.In our new heating system, the recuperator 回收器 captures waste heat from the exhaust.

在我们的新供热系统中，<recuperator>回收器recuperator>捕获排气中的废热。

9.Using a recuperator 回收器 can significantly reduce fuel consumption in power plants.

使用<recuperator>回收器recuperator>可以显著减少发电厂的燃料消耗。

10.The recuperator 回收器 is essential for improving the overall thermal efficiency of the system.

<recuperator>回收器recuperator>对于提高系统的整体热效率至关重要。

11.We installed a recuperator 回收器 to enhance the performance of our gas turbine.

我们安装了<recuperator>回收器recuperator>以增强燃气轮机的性能。

作文

In the realm of energy efficiency and sustainable design, the term recuperator refers to a device that recovers heat from exhaust gases or other waste streams to preheat incoming air or fluids. This process is crucial in various industrial applications, particularly in manufacturing processes where significant amounts of heat are generated and often wasted. By implementing a recuperator, industries can not only reduce their energy consumption but also minimize their carbon footprint, aligning with global efforts towards sustainability. The operation of a recuperator is relatively straightforward. It typically consists of two separate air streams: one carrying hot exhaust gases and the other bringing in cooler air. As these two streams pass through the recuperator, heat is transferred from the exhaust to the incoming air without mixing the two. This heat exchange process allows the incoming air to be preheated, which enhances the overall efficiency of the system. For example, in a furnace operation, the preheated air can lead to improved combustion efficiency, resulting in lower fuel consumption and reduced emissions. One of the most significant advantages of using a recuperator is its ability to recover energy that would otherwise be lost. In many industries, especially those that operate at high temperatures, the potential for energy recovery is substantial. By capturing this waste heat, companies can achieve considerable cost savings on energy bills while also contributing to environmental conservation. Furthermore, the use of a recuperator can help organizations comply with increasingly stringent regulations regarding emissions and energy use. Moreover, the implementation of a recuperator can enhance the overall reliability of industrial processes. By improving the thermal efficiency of systems, it reduces the burden on heating equipment, leading to longer operational lifespans and decreased maintenance costs. This reliability is essential for industries that depend on consistent production rates and quality standards. However, it is important to note that the effectiveness of a recuperator can vary based on several factors, including the design of the device, the temperature of the exhaust gases, and the specific application. Therefore, careful consideration must be given during the selection and installation of a recuperator to ensure optimal performance. Engineers and designers must analyze the specific needs of their operations and select the appropriate type of recuperative technology that best fits their requirements. In conclusion, the role of a recuperator in modern industrial applications cannot be overstated. As industries continue to seek ways to improve energy efficiency and reduce environmental impact, the incorporation of heat recovery systems like recuperator will become increasingly vital. By harnessing the power of waste heat recovery, businesses can not only enhance their operational efficiency but also contribute to a more sustainable future. The ongoing advancements in recuperative technologies promise to further optimize these systems, making them an essential component of energy-conscious industrial practices.

在能源效率和可持续设计的领域中，术语recuperator指的是一种设备，它从废气或其他废物流中回收热量，以预热进入的空气或流体。这个过程在各种工业应用中至关重要，特别是在制造过程中，产生了大量的热量并且通常被浪费。通过实施recuperator，工业不仅可以减少能源消耗，还可以最小化其碳足迹，从而与全球可持续性努力保持一致。 recuperator的操作相对简单。它通常由两个独立的空气流组成：一个携带热废气，另一个带入冷空气。当这两个流通过recuperator时，热量从废气转移到进入的空气中，而不混合这两者。这种热交换过程使得进入的空气能够被预热，从而增强整个系统的效率。例如，在炉子操作中，预热的空气可以提高燃烧效率，从而降低燃料消耗和减少排放。 使用recuperator的一个显著优势是其能够回收本来会被浪费的能量。在许多工业中，尤其是在高温下操作的工业，能源回收的潜力是巨大的。通过捕获这些废热，公司可以在能源账单上实现可观的节省，同时也有助于环境保护。此外，使用recuperator可以帮助组织遵守日益严格的排放和能源使用法规。 此外，实施recuperator可以增强工业过程的整体可靠性。通过提高系统的热效率，它减轻了加热设备的负担，从而延长了操作寿命并降低了维护成本。这种可靠性对于依赖一致生产率和质量标准的行业至关重要。 然而，需要注意的是，recuperator的有效性可能会因多个因素而异，包括设备的设计、废气的温度和特定应用。因此，在选择和安装recuperator时，必须仔细考虑，以确保最佳性能。工程师和设计师必须分析其操作的具体需求，并选择最适合其要求的适当类型的恢复技术。 总之，recuperator在现代工业应用中的作用不可低估。随着工业不断寻求提高能源效率和减少环境影响的方法，像recuperator这样的热回收系统的纳入将变得越来越重要。通过利用废热回收的力量，企业不仅可以提高运营效率，还可以为更可持续的未来做出贡献。不断进步的恢复技术承诺进一步优化这些系统，使其成为关注能源的工业实践的重要组成部分。